5/02/01 S-18 Stinger
II Kit Receives 51% approval!
May
1st, the FAA inspected and approved both the standard Stinger II kit and
the quick build version.
Build time of the standard kit is low
(about 200 hours) due to the low part count, while the quick build kit
time should be 100 hours or less.
The
quick build version greatly reduces the build time. Wings, tail
group, aileron and flaps are assembled covered and clear coated*.
All this for only an additional $4600 with standard clear coat, and $5500
with deluxe clear coating. Crating is also included at no extra
cost.
*ailerons and flaps are not attached to
wings, and wheels are not assembled as shown in picture.
May
1st, the FAA inspected and approved both the standard Stinger II kit and
the quick build version.
The
quick build version greatly reduces the build time. Wings, tail
group, aileron and flaps are assembled covered and clear coated*.
All this for only an additional $4600 with standard clear coat, and $5500
with deluxe clear coating. Crating is also included at no extra
cost.