RANS S-7LS COURIER "A Certified Ready To Fly Sport Plane" Specifications, Performance, Features
SPECIFICATIONS
Wing Span
29 ft 3 in
Area
147.1 sq ft
Mean Chord
5 ft
Aspect.
5.85:1
Length.
23 ft. 3in.
Height
6 ft 3 in
Cockpit Width
30 in
Headroom.Front/Rear
42 in/36 in
Legroom.Front/Rear
41.5 in/40 in
Number of Seats
2
Doors
2
Landing Gear *
TD
Baggage Volume
10 cu ft
Baggage Capacity
50 lbs
Fuel Capacity
18 gal US/ 16.75 Useable
POWER PLANT 912 ULS
Engine
Rotax 912 ULS
Output
100 hp
Oil Capacity
3.0 qts
Coolant Capacity
4.4 qts
Propeller Diameter
72 in
Propeller Type
Composite
Gear Reduction
1:2.43
Fuel G.P.H.
4.9 gal @ 75%
PERFORMANCE
Take Off Roll
325 ft
Rate of Climb
850 fpm
Service Ceiling
14,500 ft
Cruise
110 mph
VNE
130 mph
Stall Clean
50 mph
Stall Flaps
45 mph
Roll Rate
70° /sec
Glide Ratio
8:1
Landing Roll
340 ft
Endurance**
3.4 hrs
Range
341 miles
WEIGHTS AND LOADINGS
Gross Weight
1232 lbs
Empty Weight
732 lbs
Useful Load
500 lbs
Wing Loading
8.37 lbs
Power Loading
12.32
Limit Load Factors
+4 -2
* F/TD = Fixed Taildragger
** Minus half hour reserve
POWERPLANT
ROTAX 912 ULS 100 HP engine
13" spinner
Fuel system
18 gallon fuel system (9 gallons in each wing with sight gauges)
Aluminum fuel lines
Gascolator with tank and low point sumps
CABIN FEATURES
60" wide doors on each side with double vents
Upholstered adjustable seats
4-point lap and shoulder belts
Interior kit
Baggage compartment
Electric elevator trim on forward control stick
Fire extinguisher
PANEL/AVIONICS
GPS-COM (choice of either KING KLX 135A or GARMIN GNC 250CL) Transponder with encoder (Choice of either KING KT-76A or GARMIN GTX 320A)
PS Engineering intercom
ELT with test controls on panel
Carb heat
Panel includes:ASI, ALT, VSI, RPM, hour meter
Pedestal compass, slip indicator
CHT, OAT, oil temp/oil pressure gauges, volt meter
Dual controls: throttle, control stick, rudder pedals, brakes
Park brake
Cabin heat
AIRFRAME
Spring steel landing gear with fairings
600 x 6 tires with Grove hydraulic brakes
Full swivel steerable tail
Differential ailerson with spades
2-position flaps
Side mounted battery service hatch
Streamline lift and jury struts
2.8 OZ fabric with high gloss finish
1-piece boot cowl with flush joggle seams for cowling
4130 welded fuselage frame with internal corrosion protection
Tubular aluminum wing structure with corrosion protection
2-piece fiberglass cowl with 1/4 turn fasteners and oil check door
1-piece wing tips
Ball bearing aricraft control pulleys
Cable operated rudder and ailerons
Push-pull tube operated elevator
Double wire braced tail surfaces
Call or E-mail (Be Sure to Include your Mailing Address in the Email Body) us to request a complete information packet and sales contract for the S-7S/LSA.
