FUEL SYSTEM
18 GALLON FUEL SYSTEM (9 GAL IN EACH WING WITH SIGHT GAUGES)
WITH LOW POINT SUMPS
CABIN FEATURES
60" WIDE BUBBLE DOORS ON EACH SIDE WITH DOUBLE VENTS
UPHOLSTERED ADJUSTABLE SEATS
4-POINT LAP & SHOULDER BELTS
THERMAL FORMED BAGGAGE BULKHEAD CLOSE-OUT
BAGGAGE COMPARTMENT
CONTROL STICK T-TUBE UPHOLSTERY
ELECTRIC ELEVATOR TRIM MOUNTED TO FORWARD CONTROL STICK WITH INDICATOR ON PANEL
DUAL CONTROLS: THROTTLE, CONTROL STICK, RUDDER PEDALS, BRAKES
PARK BRAKE
AIRFRAME
SPRING STEEL LANDING GEAR WITH FAIRINGS
600 X 6 TIRES WHEELS AND HYDRAULIC BRAKES
FULL SWIVEL STEERABLE TAIL WHEEL
DIFFERENTIAL AILERONS WITH SPADES
2-POSITION FLAPS
THROTTLE GUARD
AFT RUDDER CABLE GUARD
SIDE MOUNTED BATTERY SERVICE HATCH
STREAMLINE LIFT STRUTS
4130 STREAMLINE JURY STRUTS
2.8 OZ. FABRIC
WING FABRIC RIVET KIT
1-PIECE COWL BOOT WITH FLUSH JOGGLE SEAMS FOR COWLING
4130 WELDED FUSELAGE AND TAIL FRAMES
TUBULAR ALUMINUM WING STRUCTURE
FIBERGLASS WING TIPS
BALL BEARING AIRCRAFT CONTROL PULLEYS
CABLE OPERATED RUDDER AND AILERONS
PUSH PULL TUBE OPERATED ELEVATOR
DOUBLE WIRE BRACED TAIL SURFACES
ENGINE INSTALL KIT EQUIPMENT
POWERPLANT
ROTAX 912S 100 HP ENGINE INSTALL KIT
DYNA FOCAL ENGINE MOUNT
72" SENSENICH WOOD PROPELLER WITH INLAID URETHANE LEADING EDGE
13" SPINNER WITH SPACER
HARDWARE, WIRING, HOSES, AND FILTERS
CARBURETOR HEAT
COOLING SYSTEM AND OIL COOLER
2-PIECE FIBERGLASS COWL WITH ¼ TURN FASTENERS & OIL CHECK DOOR MUFFLER AND EXHAUST SYSTEM
HEATER (MUFFLER STYLE)
ELECTRICAL FUEL PUMP FOR BACKUP
GASCOLATOR
PANEL/AVIONICS
PANEL INCLUDES: ASI, RPM, HOUR METER, VOLTAGE METER, CHT, OIL TEMP/OIL PRESSURE GAUGES, FUEL PRESSURE GAUGE
The S-7S is a FAA Approved 51% Kit - No welding required.
S-7S Kits delivered as of 11/05: 66
S-7 Series totals: 396
Build Time: 500 to 700 hours |
