BACK TO S-10 PAGE
RANS S-10 SAKOTA
 Specifications, Performance, Standard Features, Pricing and Options
SPECIFICATIONS 65 HP 80 HP/100 HP
Wing Span 24.0 ft 24.0 ft
Area 95.0 sq ft. 95.0 sq ft
Mean Chord 4 ft 2 in 4 ft 2 in
Aspect. 4.23:1 4.23:1
Length. 17 ft 10 in 17 ft 10 in
Height 4 ft 10 in 4 ft 10 in
Cockpit Width 35 in. 35 in.
Headroom 38 in 38 in
Legroom 42 in 42 in
Number of Seats. 2 2
Doors 2 2
Landing Gear* F/TD F/TD
Baggage Volume 8 cu ft 8 cu ft
Baggage Capacity. 30 lbs 30 lbs
Auxiliary Baggage Volume n/a. n/a
Auxiliary Baggage Capacity n/a. n/a
Fuel Capacity 18 gal US 18 gal US
POWER PLANT 582 912/912S
Engine. Rotax 582. Rotax 912/Rotax 912S
Output. 65 hp. 80 hp/100 hp
Oil Capacity. 2.5 qts. 3.0 qts
Coolant Capacity. 4.4 qts. 4.4 qts
Propeller Diameter 68 in to 70 in. 68 in to 70 in
Propeller Type. Wood Wood
Gear Reduction. 1:2.58 1:2.27/1:2.43
Fuel G.P.H. 5.75 gal @ 85% 4.1/4.5 gal @ 80%
PERFORMANCE
Take Off Roll. 300 ft. 325 ft/310 ft
Rate of Climb 800 fpm. 900 fpm/1200 fpm
Service Ceiling 12,500 ft 14,000 ft/14,500 ft
Cruise 110 mph 120 mph/125 mph
VNE. 130 mph 130 mph
Stall Clean. 45 mph 48 mph
Stall Flaps. 41 mph 44 mph
Roll Rate. 100° /sec 100° /sec
Glide Ratio 7:1 7:1
Landing Roll 400 ft. 400 ft
Endurance. 3.1 hrs. 4.4 hrs/4 hrs
Range. 341 miles 528/520 miles
WEIGHTS AND LOADINGS
Gross Weight 960 lbs 1010 lbs
Empty Weight 460 lbs 510 lbs
Useful Load. 500 lbs 500 lbs
Wing Loading 10.1 lbs. 10.6 lbs
Power Loading 14.7 lbs. 12.6 lbs
Limit Load Factors** +4 -2 +4 -2
* F/TD = Fixed Taildragger
**+6-3 at or below 800 gross weight

RANS S-10 SAKOTA
Standard Equipment and Features

ROTAX 582 65 HP liquid cooled with dual CDI ignition; RPM gauge; 2-Blade wood prop; 4130 Welded steel fuselage, tail group and tapered steel landing gear; Aluminum wheels with aircraft tires; Wheel pants; Pre-formed trussed wing ribs; .020 Aluminum leading edge wrap; 3" Tubular Aluminum Main spars; 2" Tubular Aluminum Aft spars; (2) 9 Gallon wing tanks; Seat adjustable in tilt and fore and aft; 2.7 ounce aircraft covering fabric, all tapes, glue, and inspection plates; Aluminum framed canopy; Airfoil struts; In-flight pitch trim; In-flight start; "Deep Set" panel; Roll over protection; Shoulder harnesses and lap belts; Dual elevator horns; 1 1/4" Push-pull elevator tube; Cable operated rudder; 2-Position flaps; Differential ailerons are cable and push-pull tube operated; Center control sticks and throttles; Pilot side flap lever; Pre-molded cowling; 12" Composite spinner; 4130 welded steel heavy duty engine mount with 4 point isolation; Under the wing lever; Dual fuselage foot pegs and wing steps; Dual wire braced folding tail; Steerable tail wheel; Dual rudder pedals; Hydraulic brakes; Firewall sound proofing; Baggage compartment.

The S-10 Sakota is an FAA Approved 51% Kit - No welding required.

Build Time: 350 to 600 hours

Kits delivered as of 11/05: 198

S-10 SAKOTA PRICES & OPTIONS

BASE PRICES WITHOUT ENGINE (Click Here for current Engine Pricing)
Complete Airframe Kit including all components, parts, and hardware to install the Rotax 582 DC engine  $14,100
Complete Airframe Kit including all components, parts, and hardware to install the Rotax 912 UL engine  $16,800
Complete Airframe Kit including all components, parts, and hardware to install the Rotax 912S UL engine  $16,900
NOTE: Subtract $230 for 582 install kits less prop. Subtract $300 for 912 install kit less prop. Prices for engines and props purchased later will be quoted at the time of purchase.
 
ENGINE RELATED OPTIONS
C Gear Box: 
Ratios usable for S-10 are 2.62:1 and 3:1. 3:1 requires an optional propeller.		 $570
Electric Starter Kit (Standard with 912 and 912S Install Kits): 
 Includes Magneto End Electric Starter Motor, Battery, Battery Box, Key Switch, Wiring, Cable, and Hardware.		 $800
Aerobatic Package for 582 
 Includes Mikuni Pumper Carbs, Pre-set and ready to mount, CNC Machined Adapter Plate, Throttle Cables, Mounting Hardware, Extra Lap Belt and Pads.) (Installation of the Mikuni Carbs is considered a modification to your engine and will void Rotax Warranty.)		 $1,400
 
PROP OPTIONS
Please visit with our sales staff when considering propellers other than what is standard.
 
INTERIOR OPTIONS
Prime Fuselage, Powder Coat Engine Mount & Tail Frames (Gray)  $600
Tinted Glass  $40
Heater (Radiant style, only with water cooled engines)  $375
 
UPHOLSTERY OPTIONS
Standard upholstery includes an upholstered bench seat in grey tweed material. At this time we offer no other upholstery options.
 
OTHER OPTIONS
Low Back (Rear Window)  $200
Streamline Footstep  $45
Gascolator  $60
Main Gear Leg Fairings, Raw  $90/pr
Whelen Strobe/Nav Light Kit  $900
Aero Flash Strobe/Nav Light Kit $700
Strobe Mount Kit $40
Adjustable Lift Strut Kit  $95
Aileron Spades  $110
Extra Lap Belt & Pads  $40
 

RANS Inc. reserves the right to make changes in prices, specifications or models or add improvements at any time without notice or obligation. Some measurements are approximate. Photos may show optional equipment.

BACK TO S-10 PAGE