S-6ES PRICES and OPTIONS

BASE PRICES LESS FIREWALL FORWARD (Click Here for current Engine Pricing)

Airframe Kit
Including all Standard Features 

$15,400

ENGINE INSTALL KITS

Rotax 503 DC

$1,050

Rotax 582

$1,470

Rotax 912

$3,050

Rotax 912S

$3,150

Upgrade to Super Six Cowling/12" Spinner

$475

ENGINES

Rotax 503DC - 2-stroke, 2 cylinder, 52 hp

$4,200

Rotax 582 - 2-stroke, 2 cylinder, 65 hp

$5,600

Rotax 912 - 4-stroke, 4 cylinder, 80 hp

$12,400

Rotax 912S - 4-stroke, 4 cylinder, 100 hp

$13,900

ENGINE RELATED OPTIONS

Oil Injection Tank and Mount for 503 (Standard with 582 Install Kit) 
The Rotax 503 DC Engine comes with oil injection capability. You may install a tank and mount or choose to disconnect this feature and mix gas and oil.

$175

C Gear Box (503 or 582): 
Ratios usable for Coyote II are 2.62:1 or 3:1. 3:1 requires an optional propeller.

$570

Electric Starter Kit (Standard with 912 and 912S Install Kits): 
Includes Magneto End Electric Starter Motor, Battery, Battery Box, Key Switch, Wiring, Cable, and Hardware.

$800

PROP OPTIONS NOTE: Subtract $200 for 503 and 582 Rotax Engine install kits less prop. Subtract $300 for 912, and $400 for 912S Engine install kit less prop. Prices for engines and props purchased later will be quoted at the time of purchase.
Please visit with our sales staff when considering propellers other than what is standard.

CONFIGURATION 

Tricycle Gear

N/C

Taildragger

$300

WING OPTIONS

Standard (Wing Area 1): 155.25 sq. ft.

N/C

116 Wing: 116 sq. ft.
Gives increase in cruise, 7 to 10 mph typical.

$300

INTERIOR OPTIONS

Thermal Formed Plastic Interior:  (includes behind the seat baggage compartment)
Available in Grey
For custom color, please contact the factory for quote.
This option gives the S-6ES a true finished appearance.

$650

Cargo area Bolt in style (does not require Thermal Formed Interior)

$185

Aft Baggage Compartment 

$250

Tinted glass (for doors only)

$20

Heater muffler 2-cycle: 

$140

Heater (Muffler style for 912): 

$200

Heater (Radiant style, only with water cooled engines): 

$375

Elevator Trim System, (Tab Type) Specify Flap Mount or Center Panel Mount 

$150

BRAKE/TIRE OPTIONS
The S-6ES comes standard with 6" Aircraft grade tires and Pilot’s side Hydraulic toe brakes. The following upgrades are available.

Tundra Tires (taildragger only)

$100

Trike gear up sized mains and nose wheel (includes and requires slightly larger fork)                        

$175

Both Sides Hydraulic Brakes 

$420

UPHOLSTERY OPTIONS
Standard upholstery is of a gray fabric, with black piping.

Head Rests 

$100

OTHER OPTIONS

$700

Airframe Super Six Retro
(Windshield/Top Deck/Instrument Panel)

$225

$220

Map Box - Available only with Super Six style panel (not an after market product.) 

$80

9" Composite prop spinner (Requires Prop Spacer on 912 or 912S) 

$418

$443

Gascolator 

$60

Wheel Pants with Mount Kit 
(Taildragger) $276 
(Trike) $415 

Nose Gear Disconnect with Shimmy Dampener (required with nose wheel pant) 

$275

Yaw Stabilizer Kit (Recommended for Floats) 

$375

Main Gear Leg Fairings, Unpainted 

$90/pr.

Nose Gear Leg Fairing, Unpainted 

$25

Full Lotus Float Adaptor Kit: (Available only for trike.) (Price does not include spline tubes) 

$800

Whelen Strobe/Nav Light Kit (includes wing tip mounts): 

$900

Aero Flash Strobe/Nav and Position Light Kit (includes wing tip mounts):

$700

Strobe Mount Kit 

$40

Adjustable Lift Strut Kit: 

$95

Fillet Fairing (Wing to strut): 

$35/pr.

Swing Wing

$475

Radio Mount Trays, Single, Double, or Triple require Avionics T-Panel or Super Six Retro Upgrade

$22

Antenna Mount Bracket

$10

QUICK BUILD/PRE-BUILT OPTIONS: (Refer to Quick Build Pricing Page for more Quick Build Options) 

Prebuilt Tailcone: Built and attached to cockpit cage. (Trike)

$800

Prebuilt Tailcone: Built and attached to cockpit cage. (Taildragger)

$925

QUICK BUILD OPTIONS

The S-6ES Quick Build Option includes:
Pre-built wings with fuel tanks installed.  Wings are covered.
Pre-built tailpieces with coverings installed.
Pre-built fuselage:  includes pre-built tailcone options plus installation of any parts that must be assembled prior to covering.  Fuselage covering is installed.

Quick Build Standard or 116 Wing (Add to kit cost.) 

$5,200

Add for Standard Clear Coat (Add to kit cost.) 

$3,500