BACK TO S-6S PAGE  

RANS S-6S COYOTE II
Pricing
 

CLICK HERE TO CHECK OUT OUR QUICK BUILD KIT 

BASE PRICES LESS FIREWALL FORWARD (Click Here for current Engine Pricing)

Airframe Kit
Including all Standard Features 

$17,000

 

ENGINE INSTALL KITS

Rotax 503 DC

$1,680

Rotax 582

$2,100

Rotax 912 

$3,675

Rotax 912S

$3,775

 

ENGINES

Rotax 503DC

$4,200

Rotax 582

$5,600

Rotax 912

$12,400

Rotax 912S

$13,900

 

ENGINE RELATED OPTIONS

Oil Injection Tank and Mount for 503 (Standard with 582 Install Kit) 
The Rotax 503 DC Engine comes with oil injection capability. You may install a tank and mount or choose to disconnect this feature and mix gas and oil.

$175

C Gear Box (503 or 582): 
Ratios usable for Coyote II are 2.62:1 or 3:1. 3:1 requires an optional propeller.

$570

Electric Starter Kit (Standard with 912 and 912S Install Kits): 
Includes Magneto End Electric Starter Motor, Battery, Battery Box, Key Switch, Wiring, Cable, and Hardware.

$800

 

PROP OPTIONS NOTE: Subtract $230 for 503 and 582 Rotax Engine install kits less prop. Subtract $300 for 912, and $400 for 912S Engine install kit less prop. Prices for engines and props purchased later will be quoted at the time of purchase.
Please visit with our sales staff when considering propellers other than what is standard.

 

CONFIGURATION 

Tricycle Gear

N/C

Taildragger

$300

 

WING OPTIONS

Standard (Wing Area 1): 155.25 sq. ft.

N/C

116 Wing: 116 sq. ft.
Gives increase in cruise, 7 to 10 mph typical.

$300

Sport Wing 137 sq ft Best overall choice

$300

 

QUICK BUILD/PRE-BUILT OPTIONS: (Refer to Quick Build Pricing Page for more Quick Build Options) 

Prebuilt Tailcone: Built and attached to cockpit cage 
$800 (Trike)
$925 (Taildragger)

QUICK BUILD OPTIONS

The S-6S quick build includes:
Pre-built wings with fuel tanks installed.  Wings are covered (dope & fabric).
Pre-built tailpieces with dope and fabric completed.
Pre-built fuselage includes pre-built tailcone option plus installation of any parts that must be assembled prior to covering.  Fuselage covering is complete.

Quick Build (Add to kit price.)

$6,200

2-Color paint on quick build (Add to quick build cost.)

$5,000

3-Color paint on quick build (Add to quick build cost.)

$5,500

 

TIRE / BRAKE OPTIONS
The S-6 Super is provided standard with Aircraft grade tires and single hydraulic brakes. 

Tundra Tires (taildragger only)

$100

Trike gear up sized mains and nose wheel (includes and requires slightly larger fork)

$175

Both Sides Hydraulic Brakes 

$420

 

INTERIOR OPTIONS

Tinted Glass (Available only for doors, windshield and skylight are clear only) 

$20

Map Box (not an after market option) 

$80

Heater muffler 2-cycle: 

$140

Heater muffler style for 912: 

$200

Heater (Radiant style, only with water cooled engines): 

$375

Aft Baggage Compartment 

$250

 

UPHOLSTERY OPTIONS
Standard upholstery is of a gray fabric, with black piping. 

Head Rests 

$100

 

OTHER OPTIONS

Gascolator 

$60

Wheel Pants with Mount Kit 
 (Taildragger)    $276
 (Trike)*   $415
*Nose wheel pant requires nose gear disconnect kit

Nose Gear Disconnect with Shimmy Dampener (Required with Nose WheelPant) 

$275

Yaw Stability Kit (Recommended for Floats) 

$375

Full Lotus Float Adaptor Kit: (Available only for trike.) 
(Price Does Not Include Spine Tubes) 

$800

Swing Wing 

$475

Whelen Strobe/Nav Light Kit

 $900

Aero Flash Strobe/Nav Light Kit

$700

Strobe Mount Kit

$40

Radio Mount Trays -  Specify Single, Double, or Triple

$22

Antenna Mount Bracket

$10

RANS S-6S Coyote II
Standard Equipment & Features

Full interior kit and baggage compartment; Cabin sky light; Aluminum tube tail cone; Dual rudder pedals; Single hydraulic toe brakes; Aluminum main gear wheels; Aircraft grade tires; Tapered spring steel main gear; Telescoping spring nose gear or full swivel steerable tail wheel; Deluxe Upholstered seats with map pockets, adjust fore and aft, 4 positions; Dual control sticks; Single panel mount throttle; Single center flap handle; 4 Position flaps; Adjustable lift strut; Aluminum framed bubble doors; Air vents; Aluminum airfoil struts; 3" Tubular Aluminum Main wing spar; 2" Tubular Aluminum Trailing wing spar; Welded 4130 cockpit cage comes powder coated; In-cockpit fuel sump drains; 9 Gallon fuel tank in each wing; Lap and shoulder belts; Differential ailerons; Dual elevator horns; Ailerons operated by cables and push-pull tubes; Formed aluminum tail ribs; Folding wings; Folding jury struts; Many small parts come powder coated or anodized; Gear leg fairings provided; Comes with 2.7 ounce aircraft fabric, all tapes, inspection plates, formed control exits, and fabric glue. 

Engine Install Kits

ROTAX Engine Install Kits include: 2-Blade wood prop; Low drag fiberglass cowling and 12" spinner; Cowling removes quickly with 1/4 turn fasteners; 4-Point rubber isolated engine mount; Standard instruments include: ASI, RPM, Hourmeter (Engine instruments vary with engine choice); Muffler; 12” Spinner and Spacer; Hardware, Wiring, Hoses, and Filters; EVERYTHING YOU NEED TO INSTALL YOUR ENGINE!

The S-6S is an FAA Approved 51% Kit - No welding required. 

Build Time: 400 to 600 hours 

S-6 Coyote II Series kits delivered as of 11/05: 1,702

RANS Inc. reserves the right to make changes in prices, specifications or models or add improvements at any time without notice or obligation. Some measurements are approximate. Many photos show optional equipment. 

BACK TO S-6S PAGE