S-20LS RAVEN
.png)
3 View
THE S-20 RAVEN IS GREAT HARDWARE FOR THE TASK OF BACK-COUNTRY FLYING, FLOAT FLYING AND SHORT OR LONG HAUL TOURING. IT HAS THE STYLISH BLENDING OF WHAT HAS MADE A COUPLE OF OTHER RANS PLANES SO SUCCESSFUL, WHILE MAINTAINING IT'S OWN CHARACTER. WE COMBINED THE WINGS, TAIL AND FUEL SYSTEM FROM THE S-7 COURIER AND THE ENGINE, CONTROL SYSTEM AND SEATS FROM THE COYOTE II.
THE RAVEN IS A DELIGHT TO FLY, WITH WELL-BALANCED AND LIGHT CONTROLS WITH ENOUGH FEEDBACK TO MAKE YOU FEEL LIKE YOU HAVE SOMETHING IN YOUR HAND. THE SCALE OF THE PLANE IS IMPRESSIVE TOO; STANDING TALL, WITH THE AERODYNAMIC SIZE OF THE PLANE LESS THAN OUR VENERABLE COYOTE II.
SLIDING SEATS HAVE 6" OF ADJUSTABLE RANGE. EASY TO ADJUST IN FLIGHT. RECLINE CAN ALSO BE ADJUSTED, FOR A CUSTOM FIT
FUEL VENTS AND FLUSH CAPS ALLOW EASY FUELING AND INADVERTENT VENTING ON UNEVEN GROUND
LOTS OF PANEL SPACE ALLOWS FOR FLEXIBILITY IN BUILDING A PANEL YOU'LL LOVE
EXAMPLE OF A STANDARD RANS PANEL
EXAMPLE OF THE DELUXE DIGITAL PANEL
HIGHLIGHTED FEATURES
WELDED 4130 FUSELAGE AND TAIL FRAMES
AVAILABLE IN TRIKE OR TAILDRAGGER GEAR
CHOICE OF CURVED OR RANS SIGNATURE TAIL
TUBULAR ALUMINUM WING STRUCTURE
STAMPED ALUMINUM RIBS
PITOT STATIC SYSTEM
SHEET ALUMINUM LEADING EDGE
LEXAN WINDSHIELD
CABIN SKYLIGHT
AERO-SERVO DIFFERENTIAL AILERONS
BALL BEARING AIRCRAFT CONTROL PULLEYS
CABLE-OPERATED RUDDER AND AILERONS
PUSH-PULL TUBE OPERATED ELEVATOR
DOUBLE STAINLESS STEEL TAIL BRACES
PRE-DRILLED STREAMLINE ALUMINUM STRUTS
ADJUSTABLE AFT LIFT STRUTS
4130 STREAMLINE JURY STRUTS
EXIT FAIRINGS FOR CONTROL RODS AND CABLES
MOLDED FIBERGLASS WING TIPS OR OPTIONAL CARBON FIBER
13 GALLON WING TANKS WITH SITE GAUGES
2.75 OR 6.9 GALLON HEADER TANK
FLUSH FUEL CAPS
50" WIDE CURVED DOORS W/GAS LIFT STRUTS
UPHOLSTERED, SEATS W/MAP POCKETS, ADJUSTABLE AND RECLINE
3 POINT LAP AND SHOULDER BELTS
DUAL CONTROL STICK
DUAL RUDDER PEDALS
DUAL SIDE HYDRAULIC TOE BRAKES
PARK BRAKE
STAINLESS STEEL BRAIDED BRAKE LINE
SINGLE PANEL-MOUNT THROTTLE
ELECTRIC ELEVATOR TRIM
CENTER MOUNT, 4 POSITION FLAP HANDLE
2 PIECE LEAF SPRING ALUMINUM LANDING GEAR
FULL SWIVEL STEERABLE 8" PNEUMATIC TAILWHEEL
HYDRAULIC 6" WHEELS AND BRAKES
STEERABLE NOSE GEAR (TRIKE)
TD: 21" BUSH MAINS
TR: 6.00X6 MAINS AND 5X6.00 NOSE WHEEL
SHEET ALUMINUM BAGGAGE COMPARTMENT, WITH CARGO NET
MOLDED STATION 3 BULKHEAD CLOSEOUT
MOLDED FLAP HANDLE GUARD
CNC MACHINED BOOT COWL W/FLUSH JOGGLE SEAMS FOR COWLING
PRE-CUT ALUMINUM FLOORBOARDS
FLOOR ATTACHMENTS
PRE-FABRICATED BATTERY CABLES
AN HARDWARE AND FASTENERS
AIRCRAFT FABRIC, TAPES AND CLOSE-OUTS
PLACARDS AND DECALS
OTHER OPTIONS
HEADRESTS
GASCOLATOR
ELECTRIC FUEL PUMP
PASSENGER SEAT ELECTRIC ELEVATOR TRIM
ROTAX AIR BOX
CARB HEAT W/AIR FILTERS (REQUIRES ROTAX AIR BOX)
912ULS AIR FILTERS, PAIR (IF AIRBOX NOT INSTALLED)
CARBON FIBER COWLING
CARBON FIBER WING TIPS
AVEO LED STROBES
12V POWER OUTLETS
HOUR METER
DATA PLATE
REMOTE CHARGING TERMINAL
18 AMP SEALED BATTERY
DUAL USB CHARGING JACK
HEATER, MUFFLER STYLE, FOR 912ULS
HEATER, RADIANT STYLE
FABRIC GLUE-STUART SYSTEMS
22" TUNDRA TIRES
26" BUSH TIRES
INTERNAL CORROSION PROTECTION
*CARBON WEIGHT SAVINGS IS ABOUT 14 POUNDS
